Method For Replacing Fuel Main Filter Cartridge - Komatsu WA600-8 Operation & Maintenance Manual

MAINTENANCE PROCEDURE

METHOD FOR REPLACING FUEL MAIN FILTER CARTRIDGE

• After the engine stops, all parts are still very hot, so do not replace the filter immediately. Wait for all
of parts to cool down before starting the work.
• High pressure is generated inside the engine fuel piping system when the engine is running.
When replacing the filter, wait for at least 30 seconds after stopping the engine to let the internal
pressure go down before replacing the filter.
• Do not bring any open flame close.
NOTICE
• Komatsu genuine fuel filter cartridges use a special filter that has highly efficient filtering ability.
When replacing parts, Komatsu recommends using Komatsu genuine parts.
• The common rail fuel injection system used on this machine consists of more precise parts than
those in the conventional injection pump and nozzles. If any cartridge other than a Komatsu genu-
ine filter cartridge is used, dust or dirt may get in and cause problems with the injection system.
Never use a substitute.
• When performing inspection and maintenance of the fuel system, be careful not to let any foreign
material get in, more than ever before. If dust sticks to the fuel system, wash it off thoroughly with
fuel.
• After removing the filter cartridge, fuel drops fall down from the filter head.
In order to prevent outflow of the fuel, be sure not to leave the machine while the filter cartridge is
being removed.
Items to be prepared
• Container to receive drained fuel
• Filter wrench
For the machine with rear fender, operate lever (a) downward,
and open cover (b) before the work.
1.
Open engine side cover (1) on the right side of machine,
and fix it with the rod and band.
4-56
k k
WARNING
MAINTENANCE