Komatsu WA600-8 Operation & Maintenance Manual page 216

EXPLANATION OF COMPONENTS
6.
Press the menu switch to display "Aftertreatment Devices
Regeneration" screen.
7.
Select the manual stationary regeneration, check again safety of the area around the machine and make
sure the area is free from irrelevant people or combustible material, then press ENTER switch.
If the machine needs to be moved again to secure the safety, move it to a safe place and repeat the proce-
dure from step 1.
REMARK
After ENTER switch is pressed, the screen shown in the
figure may be displayed. This indicates that the operations
in steps 1 to 4 were not performed correctly or there is
trouble other than KDPF soot accumulation abnormality.
Check the operation of the engine, make sure that you are
not depressing the accelerator pedal and RPM set is not
effective, and check the position of the directional selector
switch and parking brake switch, then repeat the proce-
dure from step 6.
If the manual stationary regeneration still cannot be per-
formed, return to the standard screen, press ENTER
switch to check the contents of other occurring troubles,
and take the necessary remedy.
REMARK
• The explanation of the manual stationary regeneration
is displayed in 3 parts on the machine monitor panel.
When ENTER switch is pressed, the regeneration can
be started immediately, regardless of which part is dis-
played. When RETURN switch is pressed, the display
returns to the standard screen.
• If no switch has been operated, the explanation dis-
play of the manual stationary regeneration is dis-
played for 30 seconds, and the screen returns to the
standard screen. At this time, to display the explana-
tion of the manual stationary regeneration again,
press ENTER switch on the standard screen to dis-
play "Aftertreatment Devices Regeneration" screen.
3-148
OPERATION