Komatsu WA600-8 Operation & Maintenance Manual page 143

OPERATION
5.
According to the screen instructions, raise the boom to the
highest position.
If it is done successfully, the bucket level position has been
adjusted and the screen returns to "Bucket Level Position
Selection" screen.
REMARK
• When canceling the adjustment, press RETURN switch (3).
• If the adjustment is failed, the message shown in the
figure is displayed.
Press ENTER switch (4), and repeat the procedure
from step 2.
Once the above adjustment is done, if the bucket is installed to the machine, you are requested only to select
bucket type "A" to "C" without repeating the level position adjustment procedure.
Method for initializing the bucket level position
You can initialize the adjusted bucket level position.
1.
Select a type of bucket you want to initialize from the
"Bucket Level Position Selection" screen, then press the
menu switch.
EXPLANATION OF COMPONENTS
3-75