Komatsu WA600-8 Operation & Maintenance Manual page 520

HANDLE LOAD METER
Clear of production
1.
On "Production Record" screen, press UP switch (2) or
DOWN switch (3) to select the target material to be
cleared, and press ENTER switch (4).
2.
When the confirmation screen for "Record Clear" is dis-
played, press ENTER switch (4) to clear or press RETURN
switch (5) to cancel clearing.
REMARK
"-" is the display of fuel consumption while the load meter
is not in use. This item also can be cleared.
CHECK TOTAL LOADING AMOUNT DATA
Display of total loading amount
1.
Press the menu switch (1) on the standard screen.
2.
Press menu switch (1) and select "Load Meter" menu.
3.
Press UP switch (2) or DOWN switch (3) to select "Total
Load Weight", and press ENTER switch (4).
The display moves to "Total Load Weight" screen, and
dump count and total load weight for each handled materi-
al are displayed.
REMARK
The dump count for each material is limited at 500, and
even if the actual dump count exceeds 500, the display re-
mains 500.
Display of total is limited at 2500.
6-58
ATTACHMENTS AND OPTIONS