Komatsu WA600-8 Operation & Maintenance Manual page 478

HANDLE STEERING WHEEL SPEC MACHINE
1.
Raise the steering tilt lock lever to FREE position (F), and
adjust the steering wheel to a desired position.
The adjustable range is shown below.
Vertical adjust- When 0 mm
ment
Tilt adjustment 0 to 129 mm
2.
Push down the steering tilt lock lever to LOCK position (L),
and fix the steering wheel securely.
METHOD FOR OPERATIONS AND CHECKS BEFORE STARTING ENGINE
k k
When starting the engine, securely press the work equip-
ment lock switch to lock the work equipment, and make
the work equipment lock pilot lamp light up.
If the work equipment is not locked and work equipment
control lever (A) is touched by mistake, it may lead to seri-
ous accident.
Perform the check before starting the engine according to the
following procedure.
1.
Check that battery disconnect switch (S) is in ON position.
2.
Check that the cover of engine shutdown secondary switch
(1) is closed.
6-16
Over 0 to 40 mm
0 to 162 mm
WARNING
ATTACHMENTS AND OPTIONS