Do Not Get Caught; Precautions Related To Protective Structures; Emergency Exit From Operator's Cab; Precautions For Cleaning Cab Glass - Komatsu H75051 Operation & Maintenance Manual

GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
Whenever leaving the machine, be sure to lower the work
equipment to the ground, lock the work equipment by pressing
work equipment lock switch (1) (pilot lamp lights up) and stop
the engine by setting parking brake switch (2) to ON (opera-
tion) position (A). In addition, lock all places and always take
the key with you and keep it in the specified location.

EMERGENCY EXIT FROM OPERATOR'S CAB

Machines equipped with a cab have a door on the left side and a door for an alternate exit on the right side. If
the door on the left side does not open, use the right side alternate exit door.

PRECAUTIONS FOR CLEANING CAB GLASS

Clean the cab glass to ensure visibility during operation.
Make sure to clean the glass with a mop from the ground.

DO NOT GET CAUGHT

• If the clearance at the articulating portion changes and you
get caught in it, you will suffer serious personal injury or
death. Do not allow anyone to come inside the articulation
range.
• The clearance in the area around the work equipment
changes according to the movement of the link. If you are
caught, this may lead to serious personal injury or death.
Do not allow anyone near any of the rotating or telescopic
parts.

PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES

The operator's compartment is equipped with a structure (such as ROPS, FOPS) to protect the operator by ab-
sorbing the impact energy.
2-20
SAFETY