Precautions When Leaving Machine; Emergency Exit From Operator's Cab; Precautions When Cleaning Cab Glass - Komatsu ecot3 WA430-6 Operation & Maintenance Manual

GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE

PRECAUTIONS WHEN LEAVING MACHINE

If the proper procedures are not taken when parking the machine,
the machine may suddenly move off by itself, and this may lead to
serious personal injury or death. Always do the following.
When leaving the machine, always lower the work equipment
completely to the ground, set work equipment lock lever (1) to
the lock position (L), set parking brake switch (2) to the ON
position (A), and stop the engine.
In addition, lock all parts, always take the key with you, and
leave it in the specified place.

EMERGENCY EXIT FROM OPERATOR'S CAB

On machines fitted with a cab, a door is installed on the left side and an emergency escape door is installed on the
right side. If the door on the left side does not open, escape from the emergency door on the right side.

PRECAUTIONS WHEN CLEANING CAB GLASS

Always keep the cab glass clean to ensure good visibility when operating.
When cleaning the front glass, pay careful attention to the safety of your footing on the platform on the left or right
of the operator's cab or on the step on the front fender so as not to fall off the machine.
For cab glass cleaning procedures, see "WALK-AROUND CHECK (PAGE 3-99)" in this manual.
2 - 18
SAFETY