Komatsu WA600-8 Operation & Maintenance Manual page 523

ATTACHMENTS AND OPTIONS
2.
Press the menu switch (1) on the standard screen.
3.
Press menu switch (1) and select "Load Meter" menu.
4.
Press UP switch (2) or DOWN switch (3) to select "Calibra-
tion", and press ENTER switch (4).
The screen changes to "Calibration" screen, and the mode
of calibration can be selected.
REMARK
The calibration load is displayed beside the menu.
If the calibration has not been done, the default value of
calibration load is displayed, and "*" is displayed beside it.
(If the calibration has not been done)
5.
Press UP switch (2) or DOWN switch (3) to select "Loaded
Calibration (Middle)", and press ENTER switch (4).
The screen changes to "Loaded Calibration (Middle)"
mode.
6.
Please set the bucket to carrying posture by full tilt accord-
ing to the screen instructions.
HANDLE LOAD METER
6-61