Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
•
Input the already registered ID on "Operator ID
Change" screen by using the numeric keypad (6), and
press ENTER switch (4).
A message is displayed below, the screen returns to
"Monitor Setting" menu screen, and the identified ID is
changed.
On "Monitor Setting" menu screen, the changed ID is
displayed in the column of "Operator ID".
•
When you press menu switch (5) on "Operator ID
Change" screen, a message is displayed below and
the screen returns to "Monitor Setting" menu screen.
On "Monitor Setting" menu screen, "****" is displayed
in the column of "Operator ID", the operator ID is not
identified
•
On "Operator ID Change" screen, if you press ENTER
switch (4) after inputting the ID which is not registered,
a message is displayed at the bottom and the screen
changes to "Monitor Setting" menu screen and ID
number is not changed.
•
On "Operator ID Change" screen, if no switch is oper-
ated for 30 seconds or more, the screen changes to
"Monitor Setting" menu screen and ID number is not
changed.
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITHOUT SKIP
When the operator identification function is available without
SKIP, the identified ID number is not displayed in the "Operator
ID" column of "Monitor Setting" menu screen.
1.
Select "Operator ID" on "Monitor Setting" menu screen,
then press ENTER switch (4) for 1 second.
3-100
OPERATION
Advertisement
Chapters
Table of Contents
