Komatsu WA600-8 Operation & Maintenance Manual page 256

MACHINE OPERATIONS AND CONTROLS
The following conditions must be met before starting the work to prevent the machine from moving dur-
ing adjustment.
• The machine is placed on a level ground.
• The work equipment is lowered to the ground in secure posture.
• The work equipment lock pilot lamp is lit.
• The engine is stopped.
Mirror (A)
Right front mirror
Mirror (B)
Left front mirror
Mirror (C)
Mirrors at upper right and left in cab
Adjust mirrors (A), (B) and (C) to a position which gives the
best view to the blind spot at the right and left sides of the rear
of the machine from the operator's seat.
The reference values of the visibility range are as follows.
Mirror (A)
Hatched area (a) must be in view.
Visibility (right side of the machine): 2000 mm
Mirror (B)
Hatched area (b) must be in view.
Visibility (left side of the machine): 2000 mm
Mirror (C)
Hatched area (c) must be in view.
Visibility (rear): 1700 mm
3-188
k k
CAUTION
OPERATION