Komatsu WA600-8 Operation & Maintenance Manual page 81

OPERATION EXPLANATION OF COMPONENTS
BASIC OPERATION OF MACHINE MONITOR WHEN STARTING ENGINE WHILE
ENGINE SHUTDOWN SECONDARY SWITCH IS ON
While the engine shutdown secondary switch is in ON (engine
is stopped) position (a), when the starting switch is turned to
ON position, the screen shown in the figure is displayed and
engine does not start.
If the engine shutdown secondary switch is turned to OFF (nor-
mal) position (b) and the machine monitor returns to the stand-
ard screen, and you can start the engine by turning the starting
switch to START position.
For the function and operating method of the engine shutdown
secondary switch, see "ENGINE SHUTDOWN SECONDARY
SWITCH (3-122)".
BASIC OPERATION OF MACHINE MONITOR WHEN STOPPING ENGINE IN NOR-
MAL SITUATION
When starting switch is turned to OFF position, the screen goes out. In the following case, the end screen is
displayed for 5 seconds, and then screen goes out.
End screen with message
If there is any message from your Komatsu distributor, it is displayed on end screen DD for 5 seconds, and then
the screen goes out.
In this case, turn the starting switch to ON position to re-check the message, and if it is the message requesting
response, send back your reply.
3-13