Komatsu WA600-8 Operation & Maintenance Manual page 138

EXPLANATION OF COMPONENTS
1.
Select "Tilt Shock Reduction Level" on "Machine Setting
and Information" menu screen, then press ENTER switch
(4).
2.
"Tilt Shock Reduction Level" screen is displayed.
Select a level on "Tilt Shock Reduction Level" screen as
shown in the figure, then press ENTER switch (4).
"OFF"
The effect on shock reduction is not obtained.
Use this level when arranging the load shape.
"Level Low"
The effect on shock reduction is small.
Use this level when arranging the load shape.
"Level Mid"
The effect on shock reduction is medium.
"Level High"
The effect on shock reduction is large.
You can perform the following operations with switches (1) to (4) on the switch panel.
(1) UP switch
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
(2) DOWN switch
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
(3) RETURN switch
Cancels the selected change and returns the screen to "Machine Setting and Information" menu screen.
(4) ENTER switch
Allocates the selected change, and returns the screen to "Machine Setting and Information" menu screen.
DUMP SHOCK REDUCTION LEVEL SETTING
The dump shock reduction function is used to reduce a shock when the bucket hits the boom, etc. during the
bucket DUMP operation in order to reduce the shock to the operator.
3-70
OPERATION