Komatsu WA600-8 Operation & Maintenance Manual page 139

OPERATION
With the dump shock reduction function, the shock can be reduced by decreasing the speed around the DUMP
end.
On "Dump Shock Reduction Level" screen, you can select the dump shock reduction level as you like.
1.
Select "Dump Shock Reduction Level" on "Machine Setting
and Information" menu screen, then press ENTER switch
(4).
2.
"Dump Shock Reduction Level" screen is displayed.
Select a level on "Dump Shock Reduction Level" screen as
shown in the figure, then press ENTER switch (4).
"OFF"
The effect on shock reduction is not obtained.
Use this level to drop off the sticking matter in the bucket.
"Level Low"
The effect on shock reduction is small.
Use this level to drop off the sticking matter in the bucket.
"Level Mid"
The effect on shock reduction is medium.
"Level High"
The effect on shock reduction is large.
You can perform the following operations with switches (1) to (4) on the switch panel.
(1) UP switch
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
(2) DOWN switch
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
(3) RETURN switch
Cancels the selected change and returns the screen to "Machine Setting and Information" menu screen.
(4) ENTER switch
Allocates the selected change, and returns the screen to "Machine Setting and Information" menu screen.
EXPLANATION OF COMPONENTS
3-71