Komatsu WA600-8 Operation & Maintenance Manual page 215

OPERATION
PROCEDURE FOR MANUAL STATIONARY REGENERATION
Exhaust gas temperature may increase during the aftertreatment devices regeneration and the high
temperature may last after the completion of regeneration.
Avoid getting near the exhaust pipe outlet and around the aftertreatment devices to prevent being burnt.
Keep combustible materials away from the exhaust pipe outlet and around the aftertreatment devices to
prevent a fire.
The manual stationary regeneration can be performed while
KDPF soot accumulation pilot lamp (2) is lit.
1.
Move the machine to a safe place, and stop it with the en-
gine running.
2.
Check that there is no person or combustible matter
around the machine (particularly in the direction of the ex-
haust gas flow).
3.
Release the accelerator pedal, and set the directional se-
lector switch to NEUTRAL position (N).
4.
When the RPM setting has been set, cancel the setting
temporarily by pressing RESUME/DECEL position (b).
5.
Set the parking brake switch to ON position (a), and apply
the parking brake.
When the parking brake has been applied, the parking
brake pilot lamp lights up on the machine monitor.
k k
CAUTION
EXPLANATION OF COMPONENTS
3-147