Step 3: Set Instrument Visa Addresses - Keysight PD1500A System Installation Manual

Double-pulse test rack and safety enclosure

Hide thumbs Also See for PD1500A:

Table of Contents

Turn-on and Software Installation

Step 3: Set Instrument VISA Addresses

Use the touch-screen on the oscilloscope to obtain its IP Address.

1 Touch the Utilities soft key at the top of the oscilloscope display.

2 Touch the Remote... soft key. This opens the Remote Setup screen.

Figure 3

Remote Setup -- Web Interface

3 Locate the Web Interface field. In the example above, the correct web address

4 On the DSOS104 oscilloscope, run the Connection Expert utility in Keysight IO

5 Select the DSOS104 Infiniium Oscilloscope from the list of instruments

6 Note the Oscilloscope IP address. In the example above, it is: 10.114.10.186.

to use is 156.140.93.168 for the DSOS104 Oscilloscope IP Address.

Do NOT use the 192.168.25.2 address.

Libraries Suite to specify the addresses and verify communication with the

other test instruments.

Step 3: Set Instrument VISA Addresses

Keysight Double-Pulse Test System Installation Guide

Table of Contents