Install Oscilloscope in Safety Enclosure Hood
Install DSOS104A Oscilloscope Inside the Safety Hood
1 From the front of the rack, open the Safety Hood.
2 Set the DSOS104 Oscilloscope on the far right of the work platform. Position
Minimum
25 mm
Figure 2
Placing the Oscilloscope Inside the Safety Hood -- Clearances
34
the oscilloscope where it will have sufficient clearance inside the hood for
airflow around the back and sides.
Minimum bottom clearance: No intrusion into the
space under the oscilloscope as defined by the feet.
Feet must rest on work surface.
Top View of Oscilloscope
Install DSOS104A Oscilloscope Inside the Safety Hood
Minimum 75 mm
Keysight Double-Pulse Test System Installation Guide
Minimum
25 mm