Identify Test Fixture Firmware Version
Identify Test Fixture Firmware Version
In the PD1000A Control Software:
1 Select the Double-Pulse Test Control tab.
2 Click on the Settings icon at the top of the screen.
3 Select Hardware Configuration for Double-Pulse Test Control.
4 Select the Hardware Configuration > Hardware tab opens the following dialog.
Figure 12 Double-Pulse Test Hardware Configuration Screen
Keysight Double-Pulse Test System Installation Guide
Install Test Fixture in the Safety Enclosure Hood
Check
to verify
communication
with test
instruments. See
NOTE
page.
Button used
on next
45