Troubleshooting; Invalid Xml File Path; Null Plc Port Number; Null Ip Address - Emerson PACSystems User Manual

User Guide
GFK-3019G
Actual EtherNet/IP Machine Adapter performance will depend on the capabilities of the EtherNet/IP
device and available network bandwidth for Predix communications.
6.6

Troubleshooting

Before attempting some of these possible solutions, be sure to check that the string for each of the
configurations in the .config and .xml files are valid and not empty. For example, verify the PLC IP address
and Port number match the installed PLC software.
6.6.1

Invalid XML file path

When the xml file path is invalid, the EtherNet/IP Machine Adapter will log the following error message
to the machine.log file, which is also displayed inside the Predix Machine Web Console OSGi Log Service.
To correct this error, reconfigure the .config file to specify the correct XML file path. Below file path is the
valid XML file path.
6.6.2

Null PLC Port Number

When the configured PLC Port is invalid means less than 1, the EtherNet/IP Machine Adapter will log the
following error message to the machine.log file, which is also displayed inside the Predix Machine Web
Console OSGi Log Service.
To correct this error, reconfigure the XML file to specify the correct Port.
6.6.3

Null IP Address

When the configured ip address is null, the EtherNet/IP Machine Adapter will log the following error
message to the machine.log file, which is also displayed inside the Predix Machine Web Console OSGi
Log Service.
To correct this error, reconfigure the XML file to specify the correct IP-address.
6.6.4

Invalid IP Address

When the configured ip address is invalid, the EtherNet/IP Machine Adapter will log the following error
message to the machine.log file, which is also displayed inside the Predix Machine Web Console OSGi
Log Service.
To correct this error, reconfigure the XML file to specify the correct IP address.
EtherNet/IP Machine Adapter
java.lang.reflect.InvocationTargetException
access denied ("java.io.FilePermission" <Given configuration file path> " "read")
configuration/machine/com.ge.ac.machineadapter.ethernetip-0.xml
Invalid configuration information: Invalid TCP/IP port number 0.
Invalid configuration information: Invalid IP Address
"Unable to connect PLC"
Chapter 6
Oct 2019
40