B4: Operation Via Pg/Pc - Only 840D Sl; Brief Description - Siemens SINUMERIK 840D sl Function Manual

B4: Operation via PG/PC - only 840D sl

3.1

Brief description

3.1
Applications
Operation via PG/PC
● must be utilized if no operator panel front is installed.
● can be utilized as a handling support for OP030 panels.
Hardware
The following hardware requirements must be fulfilled:
● PG/PC with at least 486DX33 processor and 8 MB main memory
● MS Windows must be running in ENHANCED mode (386 mode)
● PG/PC with MPI/OPI interface (implemented with PG 720/720C/740/760).
● VGA monitor with a resolution of 640x480 or higher.
Implementation Variant 1
The machine control panel (MCP) and operator panel OP030 are permanently allocated to
the NCU.
Figure 3-1
Machine control panel, OP030 and NCU are all connected either to the OPI bus or the MPI
bus. A homogenous network must be provided with respect to these components.
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
An MPI card (6ES7793-2AA00-0AA0) can be supplied for PCs with a free ISA slot.
Configuration with OP030 and PG/PC
3
267