Siemens SINUMERIK 840D sl Function Manual page 235

B3: Several operator panels connected to several NCUs, distributed systems - only 840D sl
DEFAULT_logChan = N1_K1
ShowChanMenu = True
logChanSetList = Station_2
[Station_2]
logChanList = N2_K1, N2_K2
[N2_K1]
logNCName = NCU_2
ChanNum = 1
[N2_K2]
logNCName = NCU_2
ChanNum = 2
;End of file
Step 2a:
PCU50:
Once the NETNAMES.INI file has been created, it is transferred or copied into the USER
directory.
Step 2b:
HT6:
See example 2 for creation of the softkey texts.
After the NETNAMES.INI and chan.txt files have been created, they are included in the *.abb
file with the application.
Step 3:
Set the NCK bus addresses
HMI Advanced/PCU50:
1. Enter the following in the "Operator panel front interface parameters" input screen via
2. "Save"
3. Restart the PCU
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
"Commissioning → HMI → Operator panel":
Connection: M:N (Select instead of 1:1)
NCK address: 22
PLC address: 22
according to NETNAMES.INI for NCU2 address 23
2.15 Examples
235