MD26016 $MC_PUNCH_PARTITION_TYPE=2
MD26016=2 is set in cases where the axis must behave as described above in linear
interpolation mode, but according to the default setting in circular interpolation mode (see 1st
case).
The axis behavior for the example is then as follows: In block N20, the C axis is rotated to
C=45° in the first sub-block. The following circular interpolation block rotates the C axis
through 15° in every sub-block.
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
N4: Punching and nibbling - only 840D sl
10.4 Automatic path segmentation
743