Siemens SINUMERIK 840D sl Function Manual page 504

M1: Kinematic transformation
7.2 TRANSMIT (option)
In this case, t specifies the number of the declared TRANSMIT transformation (maximum of 2).
Figure 7-2
The configurations highlighted in the figure above apply when TRANSMIT is active.
Assignment of names to geometry axes
According to the axis configuration overview shown above, the geometry axes involved in
the TRANSMIT operation must be defined with:
MD20060 $MC_AXCONF_GEOAX_NAME_TAB[0]="X"
MD20060 $MC_AXCONF_GEOAX_NAME_TAB[1]="Y"
MD20060 $MC_AXCONF_GEOAX_NAME_TAB[2]="Z"
(The choice of names in the above figure is in accordance with defaults).
504
Axis configuration for the example in the figure "Face-end machining of turned part"
(TRANSMIT)
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions