Tool Measuring - Siemens SINUMERIK 840D sl Function Manual

The following output variables are written for measurement type 28:
Output variable
$AC_MEAS_FRAME
8.4.4

Tool measuring

The control calculates the distance between the tool tip and the tool carrier reference point T
from the tool length specified by the user.
The following measurement types can be used to measure a tool loaded on a turning or
milling machine:
Measurement types
$AC_MEAS_TYPE = 10
$AC_MEAS_TYPE = 11
$AC_MEAS_TYPE = 22
$AC_MEAS_TYPE = 23
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
8.4 Setting zeros, workpiece measuring and tool measuring
Description
Result with rotation
Tool measuring
Tool lengths on a reference part that has already been measured
Tool diameter on a reference part that has already been measured
Tool diameters on machines with zoom-in function (ShopTurn)
Tool lengths with stored or current positions (ShopTurn)
Measurement of a tool length of two tools with the following orientation:
Two turning tools with:
Their own reference point each for tool orientation in the approach
direction.
One reference point for tool position that is opposite to the approach
direction and tool orientation.
Two milling tools with:
Their own reference point each for tool orientation in -y.
One reference point for tool position in -y and a tool position opposite to
the approach direction.
Two milling tools rotated 90 degrees with:
Their own reference point each for tool orientation in the approach
direction.
One reference point for a tool position that is opposite to the approach
direction and tool orientation.
M5: Measuring
667