Siemens SINUMERIK 840D sl Function Manual page 549

Programming
Figure 7-21
Example:
N...
N50 G07 X70 Z40 F4000
N60 G05 X70 F100
N...
Constraints
● It is only meaningful to select the function "Cartesian PTP travel" in JOG mode (motion
● REPOS offsets must be traversed back in JOG mode in the Cartesian coordinates while
● The Cartesian working area limitation is monitored for overtravel in jog mode if "PTP
See also
Cartesian PTP travel (Page 561)
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Machine with inclined infeed axis
according to G05) if transformation is active (TRAANG). Note the value set in MD20140
$MC_TRAFO_RESET_VALUE.
"PTP travel" is not active.
travel" is active and the axis will brake before overtraveling. If "PTP travel" is not active,
the axis can be traversed right up to the operating range limit.
M1: Kinematic transformation
Program axis for inclined axis
Approach starting position
Oblique plunge-cutting
7.4 TRAANG (option)
549