Examples - Siemens SINUMERIK 840D sl Function Manual

14.5

Examples

14.5
Programming example
N05 M3 S3000 M2=4 S2=500
N10 COUPDEF (S2, S1, 1, 1, "No",
"Dv")
N70 SPCON
N75 SPCON(2)
N80 COUPON (S2, S1, 45)
N200 FA [S2] = 100
N205 SPOS[2] = IC(-90)
N210 WAITC(S2, "Fine")
N212 G1 X.., Y.. F...
N215 SPOS[2] = IC(180)
N220 G4 S50
N225 FA [S2] = 0
N230 SPOS[2] = IC (-7200)
N350 COUPOF (S2, S1)
N355 SPOSA[2] = 0
N360 G0 X0 Y0
N365 WAITS(2)
N370 M5
N375 M30
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
; Leading spindle = master spindle =
; Following spindle = spindle 2
; Master spindle rotates at 3000 rpm
; FS: 500/min.
; Def. of coupling, can also
; be configured
; Include leading spindle in position control
; (setpoint value coupling).
; Include slave spindle in position control
; On-the-fly coupling to offset position =
45 degrees
; Positioning speed = 100 degrees/min
; Traverse with 90° overlay in negative
direction
; Wait for "fine" synchronism
; Machining
; Traverse with 180° overlay in positive
direction
; Dwell time = 50 revolutions
; of master spindle
; Activate configured speed (MD)
; 20 rev. with configured velocity
; in neg. direction
; On-the-fly decoupling, S = S2 = 3000
; Stop slave spindle at zero degrees
; Wait for spindle 2
; Stop slave spindle
S3: Synchronous spindle
14.5 Examples
921