Example Of External Oscillation Reversal; Change Reversal Position Via Synchronized Action With "External Oscillation Reversal - Siemens SINUMERIK 840D sl Function Manual

; must add up to the end position.
;
N780 WAITP(Z)
;
N790 X0 Z0
N799 M30
Description
The starting position matches reversal point 1. The synchronous actions WHEN ... (see
above) prevent an infeed when the starting position is reached.
12.5.5

Example of external oscillation reversal

12.5.5.1

Change reversal position via synchronized action with "external oscillation reversal"

DEFINE BREAKPZ AS $AA_OSCILL_BREAK_POS1[Z]
DEFINE REVPZ AS $SA_OSCILL_REVERSE_POS1[Z]
WAITP(Z)
OSP1[Z]=10 OSP2[Z]=60
OSE[Z]=0
OSB[Z]=0
WHENEVER BREAKPZ <> REVPZ DO $$SA_OSCILL_REVERSE_POS1 = BREAKPZ
OS[Z]=1 X150 F500
OS[Z]=0
WAITP(Z)
M30
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
; release the Z axis
; End of program
; enable oscillation for the Z axis
; explain reversal points 1 and 2
; End position = 0
; Starting position = 0
; at external reversal of oscillation for
; oscillation reversal point 1, adapt this
; Start oscillation, continuous infeed
; Switch off oscillation
; wait for completion of oscillation motion
P5: Oscillation - only 840D sl
12.5 Examples
843