Siemens SINUMERIK 840D sl Function Manual page 961

Example of indexing axis as linear axis
Workholder with 10 locations.
The distances between the 10 locations are different. The first location is at position -100 mm.
Figure 16-4
The indexing positions for the workholder are entered in table 2:
MD10930 $MN_INDEX_AX_POS_TAB_2[0] = -100
MD10930 $MN_INDEX_AX_POS_TAB_2[1] = 0
MD10930 $MN_INDEX_AX_POS_TAB_2[2] = 100
MD10930 $MN_INDEX_AX_POS_TAB_2[3] = 200
MD10930 $MN_INDEX_AX_POS_TAB_2[4] = 300
MD10930 $MN_INDEX_AX_POS_TAB_2[5] = 500
MD10930 $MN_INDEX_AX_POS_TAB_2[6] = 700
MD10930 $MN_INDEX_AX_POS_TAB_2[7] = 900
MD10930 $MN_INDEX_AX_POS_TAB_2[8] = 1250
MD10930 $MN_INDEX_AX_POS_TAB_2[9] = 1650
Other machine data
MD10920
$MN_INDEX_AX_LENGTH_POS_TAB_2=10
MD30500 $MA_INDEX_AX_ASSIGN_POS_TAB [AX6]
= 2
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Example: Workholder as an indexing axis
T1: Indexing axes
16.6 Starting up indexing axes
; 1st indexing position at -100
; 2nd indexing position at 0
; 3rd indexing position at 100
; 4th indexing position at 200
; 5th indexing position at 300
; 6th indexing position at 500
; 7th indexing position at 700
; 8th indexing position at 900
; 9th indexing position at 1250
; 10th indexing position at 1650
; 10 indexing positions in table 2
; Axis 6 is defined as indexing
; axis
Indexing positions in table 2
961