Axis/Spindle-Specific Machine Data; Setting Data; General Setting Data - Siemens SINUMERIK 840D sl Function Manual

4.12.1.3

Axis/spindle-specific machine data

Number Identifier: $MA_
30450 IS_CONCURRENT_POS_AX
30600 FIX_POINT_POS[n]
30610 NUM_FIX_POINT_POS
31090 JOG_INCR_WEIGHT
32000 MAX_AX_VELO
32010 JOG_VELO_RAPID
32020 JOG_VELO
32040 JOG_REV_VELO_RAPID
32050 JOG_REV_VELO
32060 POS_AX_VELO
32080 HANDWH_MAX_INCR_SIZE
32082 HANDWH_MAX_INCR_VELO_SIZE
32084 HANDWH_STOP_COND
32090 HANDWH_VELO_OVERLAY_FACTOR
32300 MAX_AX_ACCEL
32430 JOG_AND_POS_MAX_JERK
35130 GEAR_STEP_MAX_VELO_LIMIT[n]
4.12.2

Setting data

4.12.2.1

General setting data

Number Identifier: $SN_
41010 JOG_VAR_INCR_SIZE
41050 JOG_CONT_MODE_LEVELTRIGGRD
41100 JOG_REV_IS_ACTIVE
41110 JOG_SET_VELO
41120 JOG_REV_SET_VELO
41130 JOG_ROT_AX_SET_VELO
41200 JOG_SPIND_SET_VELO
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Manual and Handwheel Travel (H1)
Description
Default setting at reset: neutral axis or channel axis
Fixed point positions of the axis
Number of fixed point positions of an axis
Weighting of an increment for INC/handwheel
Maximum axis velocity
Rapid traverse in jog mode
JOG axis velocity
Revolutional feedrate in JOG mode with rapid traverse
override
Revolutional feedrate for JOG
Initial setting for positioning-axis velocity
Limitation of the size of the selected increment
Limitation of selected increment for velocity override
Effect of axis-specific VDI interface signals bits 0...5
on the handwheel
Ratio of JOG velocity to handwheel velocity (with
DRF)
Maximum axis acceleration
Max. axial jerk for JOG and POS
Maximum velocity for gear stage
Description
Size of variable increment for INC/handwheel
JOG continuous in inching mode
Revolutional feedrate in JOG mode active
JOG velocity for linear axes (for G94)
JOG velocity (for G95)
JOG velocity for rotary axes
JOG velocity for the spindle
4.12 Data lists
333