Mode Groups, Channels, Axis Replacement (K5)
6.6 Data lists
6.6.2
Setting data
6.6.2.1
Channel-specific setting data
Number
Identifier: $SC_
42000
THREAD_START_ANGLE
42100
DRY_RUN_FEED
6.6.3
Signals
6.6.3.1
Signals to/from BAG
The BAG-signals from PLC → NCK and from NCK → PLC are stored in data block 11.
The signals are described in:
References:
/FB1/ Function Manual, Basic functions; NC/PLC-Joint Signals(Z1),
Chapter "BAG, Channel, Program Operation (K1)"
6.6.3.2
Signals to/from Channel
The channel signals from PLC → NCK and from NCK → PLC are stored in data blocks 21,
22, ... for the first, second ... Channel contain.
The signals are described in:
References:
/FB1/ Function Manual, Basic functions; NC/PLC-Joint Signals(Z1),
Chapter "BAG, Channel, Program Operation (K1)"
482
Description
Start angle for thread
Dry run feedrate
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions