Operation via PG/PC (B4)
3.5 Marginal conditions
3.5
Marginal conditions
The "Operation via PG/PC" function is available in the basic version with software version
3.1 and higher. With software version 3.1, the number of NCUs which may be connected is
limited to one and the number of operator panel fronts to two. One of these must be an
OP030.
With software version 3.2 and higher, an operator panel front with MMC 100 or
MMC 102/103 can also be connected with up to three NCUs.
3.6
Data lists
No signals or machine data are required for this function.
274
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions