Siemens SINUMERIK 840D sl Function Manual page 151

Axis container names
The axis containers can be named with the machine data:
MD12750 $MN_AXCT_NAME_TAB
The axis container names can be used:
● in the axis container rotation commands AXCTSWE() and AXCTSWED() to address the
● when scanning the states of axis containers using system variables:
Defining the container content
For the axis containers 1 ... n, the ramped up assignment between an axis container slot and
a machine axis within an NCU grouping is defined with the machine data:
MD12701 ... MD12716 $MN_AXCT_AXCONF_ASSIGN_TAB1...n
The assignment between an axis container slot and the selected channel is programmed in
the machine data:
MD20070 $MC_AXCONF_MACHAX_USED (machine axis number valid in channel)
MD10002 $MN_AXCONF_LOGIC_MACHAX_TAB (Logical NCK machine axis image)
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Several Operator Panels on Several NCUs, Distributed Systems (B3)
container to be rotated.
$AC_AXCTSWA[ ]
$AN_AXCTSWA[ ]
$AN_AXCTAS[ ]
(Release of axis container rotation in channel)
(Axis container rotation active?)
(Axis container current rotation?)
2.7 Axis container
151