Siemens SINUMERIK 840D sl Function Manual page 432

Compensations (K3)
5.8 Circularity test
File functions
The displayed measurement results and the parameter settings can be stored as a file on
the MMC by selection of softkey File Functions.
Printer settings
The basic display for selecting a printer can be called by means of softkeys HMI \ Printer
selection.
The toggle key is used to define whether the displayed graphic is to be output directly on the
printer or transferred to a bit map file after softkey Print graphic is selected.
Figure 5-37
Direct output on printer
The printer must be set up under MS-Windows.
"Output on printer" is selected in the dropdown menu. When softkey Print graphic is
selected, the display graphic is output to the connected printer.
432
Basic screen for printer selection
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions