Measurement (M5)
8.4 Setting zeros, workpiece measuring and tool measuring
if $AA_MEAS_PIONT2[A] <> 0
setal(61000)
M0
stopre
if $AA_MEAS_PIONT2[B] <> 7
setal(61000)
M0
stopre
m30
8.4.3.13
Measurement of a rectangle (measurement type 25)
Measuring points for determining a rectangle ($AC_MEAS_TYPE = 25)
To determine a rectangle, tool dimensions are required in the following working planes.
● G17 working plane x/y infeed direction z
● G18 working plane z/x infeed direction y
● G19 working plane y/z infeed direction x
Four measuring points are required per rectangle.
Measuring points can be specified in any desired order. The measuring points with the
largest ordinate distance correspond to points P3 and P4.
Figure 8-19
Determining a rectangle with infeed into the working plane G17, G18 and G19
650
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions