7.3
TRACYL
Note
The TRACYL transformation described below requires that unique names are assigned to
machine axes, channels and geometry axes when the transformation is active. See
MD10000 $MN_AXCONF_MACHAX_NAME_TAB,
MD20080 $MC_AXCONF_CHANAX_NAME_TAB,
MD20060 $MC_AXCONF_GEOAX_NAME_TAB.
Besides this, no unequivocal assignments exist.
Task specification
Groove machining, see diagram.
Axis Configuration (1)
Figure 7-10
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Machining grooves on a cylinder surface with X-C-Z kinematics
Kinematic Transformation (M1)
7.3 TRACYL
507