Siemens SINUMERIK 840D sl Function Manual page 128

Several Operator Panels on Several NCUs, Distributed Systems (B3)
2.3 Several operator panel fronts and NCUs, standard functionality
IV. Description of operator component(s)
A separate entry must be generated for each operator panel connected to the bus. A
maximum of two entries in SW 3.x.
Table 2-4
Descriptive entry
Header
Next lines (optional)
(optional)
Identifier:
bel_name:
mmc_100
j:
Address of operator component on the bus:
Vocabulary words:
param: Introduces parameter for operator component
name: User-defined name for the operator component to be described
type: Operator component type
mmc_address: Bus address of operator component
V. Description of NCU component(s)
A separate entry must be generated for each NCU component connected to the bus.
Table 2-5
Descriptive entry
Header
Next lines (optional)
(optional)
*)
*)
NCU_ID:
bel_name:
name entered here (e.g. NCU1) is also output in the alarm line.
ncu_561|ncu_571|ncu_572|ncu_573:
NCU)
j:
Address of NCU component on the bus:
p:
Address of PLC component on the bus:
If bus = opi, the same value must be entered for
128
Description of operator component
Formal
[param
name=
mmc_100 | mmc_102 | op_030
type=
mmc_address = j
Entry for first or second operator panel
User-defined name with a maximum of 32 characters
mmc_102 op_030
| | : Operator component type
Description of NCU component
Formal
[param
name=
type=
ncu_572 | ncu_573
nck_address =
plc_address =
Entry for NCU component.
User-defined name with a maximum of 32 characters; with HMI Advanced, the
Identifier
]
any_name
j
= 1, 2, ... 31
NCU_ID
]
any_name
ncu_561 | ncu_571 |
j
p
,
NCU type (ncu_561 not with configuration 1 PCU, 3
j
= 1, 2, ... 31 *)
p
= 1, 2, ... 31 *)
j
and
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Example
[param MMC_1]
name = MMC_A
type = mmc_100
mmc_address = 1
Example
[param NCU_1]
name= NCU1
type= ncu_572
nck_address = 13
plc_address = 13
p
.
Extended Functions