Units Of Measurement And Measurement Variables For The Calculation - Siemens SINUMERIK 840D sl Function Manual

8.4.2.5

Units of measurement and measurement variables for the calculation

INCH or METRIC unit of measurement
The following input and output variables are evaluated with inch or metric units of
measurement:
$AA_MEAS_POINT1[axis]
$AA_MEAS_POINT2[axis]
$AA_MEAS_POINT3[axis]
$AA_MEAS_POINT4[axis]
$AA_MEAS_SETPOINT[axis]
$AC_MEAS_DIAMETER
$AC_MEAS_TOOL_LENGTH
$AC_MEAS_RESULTS[n]
The system of units in which the input and output values can be read or written can be set
via the input variable.
INT $AC_MEAS_SCALEUNIT
0: Unit of measurement with reference to
1: Unit of measurement corresponds to
The value 1 is always treated as the standard setting if the variable is not written.
Example:
The basic system is metric:
G70
$AC_MEAS_POINT1[x] = $AA_IW[x]
$AC_MEAS_POINT1[x] = 10
G71
$AC_MEAS_POINT1[x] = $AA_IW[x]
$AC_MEAS_POINT1[x] = 10
G700
$AC_MEAS_POINT1[x] = $AA_IW[x]
$AC_MEAS_POINT1[x] = 10
G710
$AC_MEAS_POINT1[x] = $AA_IW[x]
$AC_MEAS_POINT1[x] = 10
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
8.4 Setting zeros, workpiece measuring and tool measuring
Input variable for 1st measuring point
Input variable for 2nd measuring point
Input variable for 3rd measuring point
Input variable for 4th measuring point
Input variable for setpoint position
Output variable for calculated diameter
Output variable for calculated tool length
Output variable for calculation results
Unit of measurement for input and output
variable
active G codes G70/G700 in INCH
active G codes G71/G701 in METRIC
the configuration; the measurement system can
be set via OPI (standard setting)
; $AA_IW[x] supplies the basic system
; 10 mm
; $AA_IW[x] supplies the basic system
; 10 mm
; $AA_IW[x] supplies inch value
; 10 inch
; $AA_IW[x] supplies metric value
; 10 mm
Measurement (M5)
615