Siemens SINUMERIK 840D sl Function Manual page 152

Several Operator Panels on Several NCUs, Distributed Systems (B3)
2.7 Axis container
Example:
The following assignment is thrown up for the container axes after the control is ramped up (initial
state before a first container rotation):
③
④
The following is applicable to the remaining channel axes shown in the figure:
①
②
152
3rd channel axis Z of Channel 1 = 4th machine axis of NCU1
Explanation:
The 3rd channel axis (MD20070 $MC_AXCONF_MACHAX_USED[2]) shows on the 8th
machine axis in the logical NCK machine axis image
(MD10002 $MN_AXCONF_LOGIC_MACHAX_TAB[7]).
The container slot configuration CT1_SL2 is stored there.
The "NC1_AX4" entry in MD12701 $MN_AXCT_AXCONF_ASSIGN_TAB1[1] assigns the 4th
machine axis of NCU1 to the 2nd slot of the 1st axis container.
4th channel axis U of Channel 1 = 1st machine axis of NCU2
Explanation:
The 4th channel axis (MD20070 $MC_AXCONF_MACHAX_USED[3]) shows on the 9th
machine axis in the logical NCK machine axis image
(MD10002 $MN_AXCONF_LOGIC_MACHAX_TAB[8]).
The container slot configuration CT1_SL3 is stored there.
The "NC2_AX1" entry in MD12701 $MN_AXCT_AXCONF_ASSIGN_TAB1[2] assigns the 1st
machine axis of NCU2 to the 3rd slot of the 1st axis container. (⇒ Container link axis).
1st channel axis X of Channel 1 = Local machine axis 2
2nd channel axis Y of Channel 1 = 3rd machine axis of NCU2 (⇒ Link axis)
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions