Group Main Line; Function Group Configuration - Endress+Hauser Proline Prosonic Flow 93 Function Manual

5 Block USER INTERFACE
32
5.2

Group MAIN LINE

5.2.1

Function group CONFIGURATION

⇒
USER INTERFACE C
USER INTERFACE
1 = main line, 2 = additional line, 3 = information line
ASSIGN Use this function to define the display value assigned to the main line (the top line of the
(2200) local display) during normal measuring operation.
Options:
OFF
VOLUME FLOW (CH1...CH2)
CALCULATED VOLUME FLOW
VOLUME FLOW % (CH1...CH2)
CALCULATED VOLUME FLOW %
SOUND VELOCITY (CH1...CH2)
SOUND VELOCITY AVERAGE
SIGNAL STRENGTH (CH1...CH2)
FLOW VELOCITY (CH1...CH2)
FLOW VELOCITY AVERAGE
ACTUAL CURRENT (1...3)
ACTUAL FREQUENCY (1...2)
TOTALIZER (1...3)
!
If a channel is not visible, it does not appear in the options. Channels can be displayed or
hidden by means of the function MEASUREMENT (6880).
Factory setting:
VOLUME FLOW CH1
Advanced options with optional software package ADVANCED DIAGNOSTICS:
DEVIATION VOLUME FLOW (CH1...CH2)
DEVIATION VOLUME FLOW AVERAGE
DEVIATION FLOW VELOCITY (CH1...CH2)
DEVIATION FLOW VELOCITY AVERAGE
DEVIATION SIGNAL STRENGTH (CH1...CH2)
DEVIATION SOUND VELOCITY (CH1...CH2)
DEVIATION SOUND VELOCITY AVERAGE
DEVIATION ACTUAL TRANSIT TIME (CH1...CH2)
DEVIATION ACCEPTANCE RATE (CH1...CH2)
Device functions Proline Prosonic Flow 93
CONTROL CAA
⇓
MAIN LINE CCA
Functional description
➞ ➞
MAIN LINE CONFIGURATION
1
2
3
Esc
+
-
E
Note!
⇒
CONFIGURATION
Endress+Hauser
220
A0001253