Block Quick Setup - Endress+Hauser Proline Prosonic Flow 93 Function Manual

Device functions Proline Prosonic Flow 93
Endress+Hauser
4

Block QUICK SETUP

Block Group
QUICK SETUP
⇒
(B)
QUICK SETUP SENSOR Use this function to start the Quick Setup menu for assembling the ultrasonic sensors.
(1001)
Options:
YES
NO
Factory setting:
NO
!
You will find a flowchart of the Quick Setup SENSOR menu on Page 21. Please refer to
the Operating Instructions Proline Prosonic Flow 93 (BA 070D/06/en/....) for more
information on Quick Setup menus.
QUICK SETUP Use this function to start the Quick Setup menu for commissioning.
COMMISSIONING
(1002) Options:
YES
NO
Factory setting:
NO
!
You will find a flowchart of the COMMISSIONING Quick Setup menu on Page 23.
Please refer to the Operating Instructions Proline Prosonic Flow 93
(BA 070D/06/en/....) for more information on Quick Setup menus.
QUICK SETUP Use this function to start the application-specific Quick Setup menu for pulsating flow.
PULSATING FLOW
(1003) Options:
YES
NO
Factory setting:
NO
!
You will find a flowchart of the PULSATING FLOW Quick Setup menu on Page 25.
Please refer to the Operating Instructions Proline Prosonic Flow 93
(BA 070D/06/en/....) for more information on Quick Setup menus.
Function
groups
SETUP SENSOR
⇒ ⇒
(1001) P. 19
Functional description
QUICK SETUP
Note!
Note!
Note!
4 Block QUICK SETUP
Functions
QS PULSATING
QS COMMIS- T-DAT
FLOW
SION. SAVE/LOAD
(1003) P. 19
(1002) P. 19 (1009) P. 20
19