Removing The Air Filters - Qualstar XLS Series Technical & Service Manual

4.2 Replacing the Air Filters
4.2.1

Removing the Air Filters

To remove the air filters, follow these steps:
1. Locate the captive screws at the top of the air filter cover, as shown in
Figure
have two screws, and the MEM has two screws.
Figure 4-4 Location of the captive screws on the air filter cover (XLS-832700 shown)
2. Using a #2 Phillips screwdriver, loosen the screws.
3. Release the top edge of the air filter cover from the frame. See
Figure 4-5 Releasing the top edge of the air filter cover (XLS-832700 shown)
4. Remove the bottom edge of the air filter cover by lifting the tabs out of the slots.
4-4
4-4. The XLS-832700 has three screws, the XLS-820500 and XLS-812300
Captive screws (3)
Figure 4-5.
501610 Rev. 07-01-19