Replacing Pci Cards - Qualstar XLS Series Technical & Service Manual

7.5 Replacing System Controller Components
3. Using a Phillips screwdriver, remove the 10 screws that attach the system
controller cover to the power/PC bay. See
Figure 7-16 Removing the system controller cover
4. Lift the cover off of the system controller.
7.5.2

Replacing PCI Cards

This section provides instructions for removing any of the following PCI cards:
• CAN bus controller card
• Fibre Channel HBA
• SCSI HBA
Removing PCI Cards
To remove a PCI card, follow these steps:
1. Remove the top cover of the system controller, as described in
page
7-16
7-15.
Figure 7-16.
Section 7.5.1 on
501610 Rev. 07-01-19