Qualstar XLS Series Technical & Service Manual page 210

12.4 Replacing the X-Motor Assembly
4. Remove all of the screws from the X-beam access cover. See
Figure 12-22 Location of screws on X-beam access cover (left side shown)
Note:
5. Slide the gripper all the way to the left.
6. Carefully lift the access cover up and remove it from the frame. See
Figure
Figure 12-23 Removing the X-beam access cover (front panel removed for clarity)
12-24
The X-beam cover for the XLS-832700 has 12 screws (6 large and 6
small); the X-beam covers for the XLS-820500 and XLS-812300 have 10
screws.
12-23.
Figure 12-22.
501610 Rev. 07-01-19