Installing A Cartridge Bay - Qualstar XLS Series Technical & Service Manual

9.5 Replacing a Drive Bay with a Cartridge Bay
9.5.2

Installing a Cartridge Bay

To install a cartridge bay, follow these steps:
1. Orient the empty cartridge bay so that the cartridge slots are to the front and the
flanged edges are on top. See
Figure 9-20 Cartridge bay orientation
2. From the back of the library, lift the empty cartridge bay into an empty bay
position.
3. Slide the bay forward.
If the bay does not slide easily, reposition it slightly and try again. Do
not force it into position.
9-20
Figure 9-20.
Cartridge slots
Flange
CAUTION
501610 Rev. 07-01-19