Putting The Xls In Logical Mode - Qualstar XLS Series Technical & Service Manual

3. From the Change Mode section, select Physical Mode. The Put Into Physical
Mode confirmation page opens, as shown in
Figure 5-9 Put Into Physical Mode confirmation page
4. Press Yes to confirm that you want to put the XLS in physical mode.
5.4.4

Putting the XLS in Logical Mode

This section provides instructions for putting the XLS in logical mode. When you put the
XLS in logical mode, the following occurs:
• The XLS restores the logical libraries to their previous states.
Important:
• As it brings any logical libraries online, the XLS returns Check Condition status
to any new requests by the software applications, indicating that the cartridge
inventory may have changed.
• An event is logged in the event log and a message is sent to designated users.
To put the XLS in logical mode, follow these steps:
1. Make sure that all library doors are closed and locked.
2. If necessary, press the Home button in the upper right corner of any page to
return to the Home page.
3. Access the Service portlet (see
XLS Library Technical Service Manual
• If a logical library was online when you put the XLS in
physical mode, it will go back online when you put the
XLS in logical mode.
• If a logical library was offline when you put the XLS in
physical mode, it will remain offline when you put the XLS
in logical mode.
Section 5.3 on page
5
Using X-Link Service Options
Figure 5-9.
5-7).
5-69