Removing A Fan - Qualstar XLS Series Technical & Service Manual

Required tools and equipment:
• #2 Phillips screwdriver
• Replacement fan
7.4.1

Removing a Fan

To remove a fan, follow these steps:
1. Follow the instructions in
out.
2. Using your fingers or a Phillips screwdriver, turn the thumb screw
counterclockwise to loosen the fan.
3. Holding the fan by the thumb screw, lift the fan out of the power/PC bay. See
Figure
Figure 7-14 Removing a fan
XLS Library Technical Service Manual
Make sure you have the following:
Section 7.3.1 on page 7-11
7-14.
Thumb screw
7
Replacing Power/PC Bay Components
to slide the power/PC bay
7-95