Qualstar XLS Series Technical & Service Manual page 347

3. Open the doors.
4. Locate the holes for the two shipping restraints at the front.
5. Install the front shipping restraints.
shipping restraint behind the right door; the shipping restraint on the left is
located behind the left door.
Figure B-10
6. Close the door).
XLS-820500 or XLS-812300
1. Locate the holes for the two shipping restraints.
2. Using a 5/16-inch hex wrench (Qualstar part number 736-004504), install the
shipping restraints in the back. See
Figure B-11
3. To install the front shipping restraint on the right, follow these steps:
XLS Library Technical Service Manual
Location of a front shipping restraint (right side shown)
Shipping restraints
Location of the back shipping restraints
Figure B-10 shows the location of the
Shipping restraint
Figure B-11.
B
Packing the XLS
B-
333