5.1 Connecting the XLS to a Computer
5.1.2
Connecting to a Standalone Computer
To connect the XLS to a standalone computer, follow these steps:
1.
Set the computer's IP address to the following settings:
– IP address: 192.168.0.245
– Subnet mask: 255.255.255.0
2.
Insert one end of the Ethernet cable into the service port (ENET 1).
Note:
3.
Connect the other end of the cable to the computer's Ethernet port.
4.
Start the Internet browser.
5.
In the address line for the browser, type the default IP address for the service
port, http://192.168.0.1. See
Figure 5-4 Entering the service port IP address (Internet Explorer shown)
5-4
The service port for the XLS-832700 is located behind the air filter cover
on the front of the library (see
for the XLS-820500 and XLS-812300 is located on back of the power/PC
bay (see
Figure 5-1 on page
Figure
Figure 5-2 on page
5-1).
5-4.
5-2). The service port
501610 Rev. 07-01-19