Qualstar XLS Series Technical & Service Manual page 359

power supply
robotics
SCSI
Simple Mail
Transfer Protocol
(SMTP)
Simple Network
Management
Protocol (SNMP)
SMTP
SNMP
SNMP trap
solenoid
system controller
tape cartridge
tape drive
tape drive
assembly
touch screen
user group
virtual keyboard
XMI
XLS Library Technical Service Manual
An electronic device used to convert electrical power from alternating
current to direct current, or from one direct current voltage to another
direct current voltage.
Any part of the library that moves automatically, including the carousel,
the gripper, the I/O ports, and the handler.
Small Computer System Interface.
A protocol for sending e-mail messages between servers and between a
mail client and a mail server.
A protocol for monitoring and managing systems and devices in a network.
The data being monitored and managed is defined by a MIB. The functions
supported by the protocol are the request and retrieval of data, the setting
or writing of data, and traps that signal the occurrence of events.
Simple Mail Transfer Protocol.
Simple Network Management Protocol.
A message sent by the XLS to an SNMP host indicating that a certain type
of event has occurred.
A two-position electromechanical actuator device. Solenoids are used in the
XLS for door locks, I/O ports, and the cartridge gripping mechanism.
The PC within the library that manages and controls all library activities.
A small cartridge that contains magnetic tape.
The devices used to write and read data. Tape drives are mounted in drive
carriers. Tape drives are referred to as data transfer elements in the SCSI
standard.
The tape drive plus the drive carrier. Tape drive assemblies are installed
in the drive bays.
The 15-inch color LCD on the library's front panel used to display X-Link.
A collection of library users that has been assigned a common set of
permissions.
A feature of the library's touch screen display that allows you to enter text
without needing a real keyboard.
The X-Link interface.
Glossary
GL-
345