Cartridge Present And Clear Sensor Calibration Screen - Qualstar RLS-8350 Technical & Service Manual

5.2.1 Cartridge Present and Clear Sensor Calibration Screen

Figure 5-6 The Calibration/Cartridge Present and Clear Sensor Calibration Screen
This screen shows the value of the emitter intensity determined during calibration of
the optoelectronic pairs for the various sensors. The values on this screen should only
be edited by an authorized service technician.
Information on this screen may be edited by pressing the Edit button. Note that changes
to the screen will not be saved until the Save button is pressed. Pressing the Cancel but-
ton will remove all of the current editing and revert to the last saved version of the
screen.
Section
Calibration
Cartridge Present Calibration
Clear Sensor PWM (Pulse
Width Modulation)
Table 5-1 Calibration/Cartridge Present and Clear Sensor Calibration Screen Information
5-6
Field
Calibrated Has the library been successfully calibrated?
Present PWM
Emitter intensity determined during calibration for the opto pair
Drive Emitter intensity determined during calibration for the opto pair.
Left Back Emitter intensity determined during calibration for the opto pair.
Left Front Emitter intensity determined during calibration for the opto pair.
Emitter intensity determined during calibration for the opto pair.
Left Side
Right Back Emitter intensity determined during calibration for the opto pair.
Right Front Emitter intensity determined during calibration for the opto pair.
Right Side Emitter intensity determined during calibration for the opto pair.
The Private
Description
511010 Rev. 07-01-19
Option
Yes or No
. 1 to 50
1 to 50
1 to 50
1 to 50
1 to 50
1 to 50
1 to 50
1 to 50