Qiagen QIAcuity 911000 User Manual page 81

Table 8. dPCR step status icon
Icon
When the run is finished, the status of the run changes to Done and the Eject
available. To view the details about the run, tap Show details. To eject the plate, tap Eject
Continuous loading and unloading of plates
Note: The Continuous loading and unloading of plates function is only available with QIAcuity
Eight and QIAcuity Four. To load or unload a plate during a run in the QIAcuity One instrument,
abort the run. For more information, see section Aborting a run.
You can also load and unload plates while the instrument is running. You can load new plates,
unload finished ones, or remove plates that are still in progress. To eject a tray, press the physical
button on the instrument, or tap Eject tray on the touchscreen. If any of the running plates are in the
Imaging step, this process is paused. Once the changes in the tray are done, tap Close tray or
press the physical button on the device to close the tray. The software checks the plates and displays
the plate information on the screen. If any of the plates that were running before the tray was
opened are missing, an error message appears, and the run is stopped.
QIAcuity User Manual 07/2020
Status
The step is successfully finished.
The step is being executed.
The step is pending, and its execution will start after the current step is done.
The step failed.
button becomes
.
81